planet.com.sa
planet.com.sa

login

planet.com.sa
planet.com.sa

Product Meta

  • product_code: POE-E202
  • product_editor_4418_tab_content: <strong>One Power Sourcing for Multi Powered Devices Solution</strong> Is 100-meter cable long enough for a wide range of IP surveillance deployments? The answer is certainly not.  To achieve the benefits of IP surveillance and the long-distance IP camera distribution, PLANET POE-E202 is quite a useful Gigabit PoE extender if users have most of their network already set up, and hope to expand network communications and overcome cable distance limitations offering connections to devices in locations where traditional networking does not allow. <img style="display: block; margin-left: auto; margin-right: auto;" src="https://www.planet.com.sa/planet-storage/2025/01/POE-E202v1.1-6.png" alt="" width="700" height="237" />
  • product_editor_4418_tab_enabled: yes
  • product_editor_4418_tab_content_changed: yes
  • product_editor_4418_tab_title: Applications
  • product_editor_4421_tab_content: <strong>Physical Port</strong> <ul> <li><strong>3-port 10/100/1000BASE-T</strong> Gigabit RJ45 <ul> <li>1-port <strong>data + power input</strong></li> <li>2-port <strong>data + power output</strong></li> </ul> </li> </ul> <strong>Power over Ethernet</strong> <ul> <li>1-port data + power input <ul> <li>Complies with IEEE 802.3at Power over Ethernet Plus end-span/mid-span PD</li> <li>Supports PoE input power up to 30.8 watts</li> </ul> </li> <li>2-port data + power output <ul> <li>Complies with IEEE 802.3af/IEEE 802.3at Power over Ethernet end-span PSE</li> <li>Up to 2 IEEE 802.3af/802.3at devices powered</li> <li>Supports PoE power up to 25 watts for each PoE port</li> <li>Auto detects powered device (PD)</li> </ul> </li> <li>Extends the range of PoE to an additional 100 meters (328ft.)</li> <li>Forwards both Ethernet <strong>data</strong> and <strong>PoE</strong> power to remote device</li> </ul>   <strong>Layer 2 Features</strong> <ul> <li>Hardware-based 10/100/1000Mbps auto-negotiation and auto MDI/MDI-X</li> <li>Integrates address look-up engine, supporting 2K absolute MAC addresses</li> <li>10K iumbo packet support</li> <li>IEEE 802.1Q VLAN transparency</li> <li>Features Store-and-Forward mode with wire-speed filtering and forwarding rates</li> <li>IEEE 802.3x flow control for full duplex operation and back pressure for half duplex operation</li> <li>Automatic address learning and address aging</li> <li>Supports CSMA/CD protocol</li> </ul>   <strong>Case and Installation</strong> <ul> <li>No external power cable installation required</li> <li>Made of metal, desktop size design</li> <li>Wall-mountable, Plug-and-Play installation</li> <li>0 ~ 50 degrees C operating temperature</li> </ul>
  • product_editor_4421_tab_enabled: yes
  • product_editor_4421_tab_content_changed: yes
  • product_editor_4421_tab_title: Key Features
  • product_editor_4422_tab_content:   <div class="table-responsive"> <table class="common_table_sky" style="width: 100%;"> <thead> <tr> <th colspan="2">Interfaces</th> </tr> </thead> <tbody> <tr> <td class="align-middle">PoE IN</td> <td>1 x 10/100/1000BASE-T Ethernet with IEEE 802.3at PoE<b> “Data + DC power”</b> in auto MDI/MDI-X, auto-negotiation RJ45 connector</td> </tr> <tr> <td class="align-middle">PoE OUT</td> <td>2 x 10/100/1000BASE-T Ethernet with IEEE 802.3at/802.3af PoE<b> “Data + DC power” </b>out auto MDI/MDI-X, auto-negotiation RJ45 connector</td> </tr> </tbody> <thead> <tr> <th colspan="2">Power over Ethernet</th> </tr> </thead> <tbody> <tr> <td class="align-middle">PoE Standard</td> <td><b>“PoE In” Port</b> IEEE 802.3at Power over Ethernet Plus end-span/mid-span PD class 4 PD <b>Per “PoE Out” Port</b> IEEE 802.3at Power over Ethernet Plus end-span PSE IEEE 802.3af Power over Ethernet end-span PSE</td> </tr> <tr> <td class="align-middle">PoE Power Supply Type</td> <td>End-span (Type A)</td> </tr> <tr> <td class="align-middle">PoE Power</td> <td><b>“PoE In” Port</b> 52~56V DC, max. 30.8 watts <b>Per “PoE Out” Port</b> 44~55V DC, max. 25 watts</td> </tr> <tr> <td class="align-middle">Power Pin Assignment</td> <td><b>“PoE In” Port</b> 1/2 (+), 3/6 (-); 4/5 (+), 7/8 (-) <b>Per “PoE Out” Port</b> 1/2 (+), 3/6 (-)</td> </tr> </tbody> <thead> <tr> <th colspan="2">Hardware Specifications</th> </tr> </thead> <tbody> <tr> <td class="align-middle">Data Rate</td> <td>10/100/1000Mbps</td> </tr> <tr> <td class="align-middle">MAC Address Table</td> <td>2K</td> </tr> <tr> <td class="align-middle">Data Buffer</td> <td>2Mbits</td> </tr> <tr> <td class="align-middle">Switch Architecture</td> <td>Store-and-Forward</td> </tr> <tr> <td class="align-middle">Switch Fabric</td> <td>6Gbps</td> </tr> <tr> <td class="align-middle">Switch Throughput</td> <td>4.46Mpps @ 64 bytes</td> </tr> <tr> <td class="align-middle">Jumbo Frame</td> <td>10KB</td> </tr> <tr> <td class="align-middle">Flow Control</td> <td>IEEE 802.3x pause frame for full duplex Back pressure for half duplex</td> </tr> <tr> <td class="align-middle">LED Indicators</td> <td>“PoE In” Port: PoE-in-Use x 1 (<span style="color: orange;"><b>amber</b></span>), LNK/ACT x 1 (<span style="color: green;"><b>green</b></span>) “PoE Out” Port 1: PoE-in-Use x 1 (<span style="color: orange;"><b>amber</b></span>), LNK/ACT x 1 (<span style="color: green;"><b>green</b></span>) “PoE Out” Port 2: PoE-in-Use x 1 (<span style="color: orange;"><b>amber</b></span>), LNK/ACT x 1 (<span style="color: green;"><b>green</b></span>)</td> </tr> <tr> <td class="align-middle">Protection</td> <td>ESD (Ethernet): 2KV (TBD) Surge (EFT for power) : 2KV (TBD)</td> </tr> <tr> <td class="align-middle">Enclosure</td> <td>Metal</td> </tr> <tr> <td class="align-middle">Installation</td> <td>Wall mountable</td> </tr> <tr> <td class="align-middle">Dimensions (W x D x H)</td> <td>140 x 76.7 x 27.7 mm</td> </tr> <tr> <td class="align-middle">Weight</td> <td>258g</td> </tr> <tr> <td class="align-middle">Power Requirements</td> <td>IEEE 802.3at compliant with voltage within 52V-56V DC</td> </tr> <tr> <td class="align-middle">Power Consumption</td> <td>1.6 watts/5.5BTU (System on with PoE input) 2.2 watts/7.5BTU (Ethernet full loading without PoE function) 36 watts/122.8BTU (Full loading with PoE function)</td> </tr> <tr> <td class="align-middle">Network Cable</td> <td>10BASE-T: 4-pair UTP Cat. 5 up to 100m (328ft) 100BASE-TX: 4-pair UTP Cat. 5 up to 100m (328ft) 1000BASE-T: 4-pair UTP Cat. 5e, 6, up to 100m (328ft) EIA/TIA-568 100-ohm STP (100m, 328ft)</td> </tr> </tbody> <thead> <tr> <th colspan="2">Standard Conformance</th> </tr> </thead> <tbody> <tr> <td class="align-middle">Regulatory Compliance</td> <td>FCC Part 15 Class A, CE</td> </tr> <tr> <td class="align-middle">Standard Compliance</td> <td>IEEE 802.3 10BASE-T Ethernet IEEE 802.3u 100BASE-TX Fast Ethernet IEEE 802.3ab 1000BASE-T Gigabit Ethernet IEEE 802.3af Power over Ethernet IEEE 802.3at Power over Ethernet Plus IEEE 802.3x Flow Control</td> </tr> </tbody> <thead> <tr> <th colspan="2">Environment</th> </tr> </thead> <tbody> <tr> <td class="align-middle">Operating</td> <td>Temperature: 0 ~ 50 degrees C Relative Humidity: 5 ~ 95% (non-condensing)</td> </tr> <tr> <td class="align-middle">Storage</td> <td>Temperature: -10 ~ 70 degrees C Relative Humidity: 5 ~ 95% (non-condensing)</td> </tr> </tbody> </table> </div>
  • product_editor_4422_tab_enabled: yes
  • product_editor_4422_tab_content_changed: yes
  • product_editor_4422_tab_title: Specifications
  • ekit_post_views_count: 508
  • product_editor_4418_tab_sticky_width: pw-content-1
  • product_editor_4418_tab_sticky_position: pw-left-stick
  • product_editor_4421_tab_sticky_width: pw-content-1
  • product_editor_4421_tab_sticky_position: pw-left-stick
  • product_editor_4422_tab_sticky_width: pw-content-1
  • product_editor_4422_tab_sticky_position: pw-left-stick
  • product_editor_4423_tab_content:
  • product_editor_4423_tab_content_changed: yes
  • product_editor_4423_tab_enabled: yes
  • product_editor_4423_tab_title: Downloads
  • product_editor_4423_tab_sticky_width: pw-content-1
  • product_editor_4423_tab_sticky_height: 1
  • product_editor_4423_tab_sticky_position: pw-left-stick
  • product_editor_4424_tab_content:
  • product_editor_4424_tab_content_changed: yes
  • product_editor_4424_tab_enabled: yes
  • product_editor_4424_tab_title: Related Products
  • product_editor_4424_tab_sticky_width: pw-content-1
  • product_editor_4424_tab_sticky_height: 1
  • product_editor_4424_tab_sticky_position: pw-left-stick
  • total_sales: 0
  • accessories_table: <div class="table-responsive"> <table class="common_table"> <thead> <tr> <th colspan="2">Ordering Information</th> </tr> </thead> <tbody> <tr> <td class="text-center align-middle"> <h3 class="h6 m-0">POE-E202</h3> </td> <td>1-port 802.3at PoE+ to 2-port 802.3af/at Gigabit PoE Extender</td> </tr> </tbody> </table> </div>                        
  • product_label:
  • prouduct_loop_image_transparent_bg_:
  • 6_features_images: a:6:{i:0;s:5:"15159";i:1;s:5:"15158";i:2;s:5:"15157";i:3;s:5:"15156";i:4;s:5:"15155";i:5;s:5:"15154";}
  • datasheet_0_date: 20221021
  • datasheet_0_version: 1.0
  • datasheet_0_description: POE-E202v2
  • datasheet_0_download_pdf: https://www.planet.com.sa/storage/products/POE-E202/C-POE-E202v2_L.pdf
  • datasheet: 1
  • quick_guide:
  • users_manual_0_date: 20221014
  • users_manual_0_version: 1.1
  • users_manual_0_description: Release for hardware version 2.0.
  • users_manual_0_download_pdf: https://www.planet.com.sa/storage/products/POE-E202/EM-POE-E202_v1.1.pdf
  • users_manual: 1
  • ec_declaration_0_date: 20221205
  • ec_declaration_0_version: 2.0
  • ec_declaration_0_description: Release for hardware version 2.0.
  • ec_declaration_0_download_pdf: https://www.planet.com.sa/storage/products/POE-E202/POE-E202v2.pdf
  • ec_declaration: 1
  • android_app:
  • driver:
  • firmware:
  • utility:
  • compatible_list:
  • site-sidebar-layout: default
  • ast-site-content-layout: default
  • site-content-style: default
  • site-sidebar-style: default
  • theme-transparent-header-meta: default
  • astra-migrate-meta-layouts: set
  • applications_tab: <p><strong>One Power Sourcing for Multi Powered Devices Solution</strong></p><p>Is 100-meter cable long enough for a wide range of IP surveillance deployments? The answer is certainly not.  To achieve the benefits of IP surveillance and the long-distance IP camera distribution, PLANET POE-E202 is quite a useful Gigabit PoE extender if users have most of their network already set up, and hope to expand network communications and overcome cable distance limitations offering connections to devices in locations where traditional networking does not allow.</p><p><img style="display: block; margin-left: auto; margin-right: auto;" src="https://www.planet.com.sa/planet-storage/2025/01/POE-E202v1.1-6.png" alt="" width="700" height="237"></p>
  • key_features_tab: <p><strong>Physical Port</strong></p><ul> <li><strong>3-port 10/100/1000BASE-T</strong> Gigabit RJ45  <ul> <li>1-port <strong>data + power input</strong></li> <li>2-port <strong>data + power output</strong></li> </ul> </li> </ul><p><strong>Power over Ethernet</strong></p><ul> <li>1-port data + power input <ul> <li>Complies with IEEE 802.3at Power over Ethernet Plus end-span/mid-span PD</li> <li>Supports PoE input power up to 30.8 watts</li> </ul> </li> <li>2-port data + power output <ul> <li>Complies with IEEE 802.3af/IEEE 802.3at Power over Ethernet end-span PSE</li> <li>Up to 2 IEEE 802.3af/802.3at devices powered</li> <li>Supports PoE power up to 25 watts for each PoE port</li> <li>Auto detects powered device (PD)</li> </ul> </li> <li>Extends the range of PoE to an additional 100 meters (328ft.)</li> <li>Forwards both Ethernet <strong>data</strong> and <strong>PoE</strong> power to remote device </li> </ul><p> </p><p><strong>Layer 2 Features</strong></p><ul> <li>Hardware-based 10/100/1000Mbps auto-negotiation and auto MDI/MDI-X</li> <li>Integrates address look-up engine, supporting 2K absolute MAC addresses</li> <li>10K iumbo packet support</li> <li>IEEE 802.1Q VLAN transparency</li> <li>Features Store-and-Forward mode with wire-speed filtering and forwarding rates</li> <li>IEEE 802.3x flow control for full duplex operation and back pressure for half duplex operation</li> <li>Automatic address learning and address aging</li> <li>Supports CSMA/CD protocol</li> </ul><p> </p><p><strong>Case and Installation</strong></p><ul> <li>No external power cable installation required</li> <li>Made of metal, desktop size design</li> <li>Wall-mountable, Plug-and-Play installation</li> <li>0 ~ 50 degrees C operating temperature</li> </ul>
  • specifications_tab: <table style="width:100%;" class="common_table_sky"><thead><tr><th colspan="2">Interfaces</th></tr></thead><tbody><tr><td class="align-middle">PoE IN</td><td>1 x 10/100/1000BASE-T Ethernet with IEEE 802.3at PoE<b> “Data + DC power”</b> in <br /> auto MDI/MDI-X, auto-negotiation RJ45 connector</td></tr><tr><td class="align-middle">PoE OUT</td><td>2 x 10/100/1000BASE-T Ethernet with IEEE 802.3at/802.3af PoE<b> “Data + DC power” </b>out<br /> auto MDI/MDI-X, auto-negotiation RJ45 connector</td></tr></tbody><thead><tr><th colspan="2">Power over Ethernet</th></tr></thead><tbody><tr><td class="align-middle">PoE Standard</td><td><b>“PoE In” Port</b><br /> IEEE 802.3at Power over Ethernet Plus end-span/mid-span PD class 4 PD<br /> <b>Per “PoE Out” Port</b><br /> IEEE 802.3at Power over Ethernet Plus end-span PSE<br /> IEEE 802.3af Power over Ethernet end-span PSE</td></tr><tr><td class="align-middle">PoE Power Supply Type</td><td>End-span (Type A)</td></tr><tr><td class="align-middle">PoE Power</td><td><b>“PoE In” Port</b><br /> 52~56V DC, max. 30.8 watts<br /> <b>Per “PoE Out” Port</b><br /> 44~55V DC, max. 25 watts</td></tr><tr><td class="align-middle">Power Pin Assignment</td><td><b>“PoE In” Port</b><br /> 1/2 (+), 3/6 (-); 4/5 (+), 7/8 (-)<br /> <b>Per “PoE Out” Port</b><br /> 1/2 (+), 3/6 (-)</td></tr></tbody><thead><tr><th colspan="2">Hardware Specifications</th></tr></thead><tbody><tr><td class="align-middle">Data Rate</td><td>10/100/1000Mbps</td></tr><tr><td class="align-middle">MAC Address Table</td><td>2K</td></tr><tr><td class="align-middle">Data Buffer</td><td>2Mbits</td></tr><tr><td class="align-middle">Switch Architecture</td><td>Store-and-Forward</td></tr><tr><td class="align-middle">Switch Fabric</td><td>6Gbps</td></tr><tr><td class="align-middle">Switch Throughput</td><td>4.46Mpps @ 64 bytes</td></tr><tr><td class="align-middle">Jumbo Frame</td><td>10KB</td></tr><tr><td class="align-middle">Flow Control</td><td>IEEE 802.3x pause frame for full duplex<br /> Back pressure for half duplex</td></tr><tr><td class="align-middle">LED Indicators</td><td>“PoE In” Port: PoE-in-Use x 1 (<font color="Orange"><b>amber</b></font>), LNK/ACT x 1 (<font color="Green"><b>green</b></font>)<br /> “PoE Out” Port 1: PoE-in-Use x 1 (<font color="Orange"><b>amber</b></font>), LNK/ACT x 1 (<font color="Green"><b>green</b></font>)<br /> “PoE Out” Port 2: PoE-in-Use x 1 (<font color="Orange"><b>amber</b></font>), LNK/ACT x 1 (<font color="Green"><b>green</b></font>)</td></tr><tr><td class="align-middle">Protection</td><td>ESD (Ethernet): 2KV (TBD)<br /> Surge (EFT for power) : 2KV (TBD)</td></tr><tr><td class="align-middle">Enclosure</td><td>Metal</td></tr><tr><td class="align-middle">Installation</td><td>Wall mountable</td></tr><tr><td class="align-middle">Dimensions (W x D x H)</td><td>140 x 76.7 x 27.7 mm</td></tr><tr><td class="align-middle">Weight</td><td>258g</td></tr><tr><td class="align-middle">Power Requirements</td><td>IEEE 802.3at compliant with voltage within 52V-56V DC</td></tr><tr><td class="align-middle">Power Consumption</td><td>1.6 watts/5.5BTU (System on with PoE input)<br /> 2.2 watts/7.5BTU (Ethernet full loading without PoE function)<br /> 36 watts/122.8BTU (Full loading with PoE function)</td></tr><tr><td class="align-middle">Network Cable</td><td>10BASE-T: 4-pair UTP Cat. 5 up to 100m (328ft)<br /> 100BASE-TX: 4-pair UTP Cat. 5 up to 100m (328ft)<br /> 1000BASE-T: 4-pair UTP Cat. 5e, 6, up to 100m (328ft)<br /> EIA/TIA-568 100-ohm STP (100m, 328ft)</td></tr></tbody><thead><tr><th colspan="2">Standard Conformance</th></tr></thead><tbody><tr><td class="align-middle">Regulatory Compliance</td><td>FCC Part 15 Class A, CE</td></tr><tr><td class="align-middle">Standard Compliance</td><td>IEEE 802.3 10BASE-T Ethernet<br /> IEEE 802.3u 100BASE-TX Fast Ethernet<br /> IEEE 802.3ab 1000BASE-T Gigabit Ethernet<br /> IEEE 802.3af Power over Ethernet<br /> IEEE 802.3at Power over Ethernet Plus <br /> IEEE 802.3x Flow Control</td></tr></tbody><thead><tr><th colspan="2">Environment</th></tr></thead><tbody><tr><td class="align-middle">Operating</td><td>Temperature: 0 ~ 50 degrees C<br /> Relative Humidity: 5 ~ 95% (non-condensing)</td></tr><tr><td class="align-middle">Storage</td><td>Temperature: -10 ~ 70 degrees C<br /> Relative Humidity: 5 ~ 95% (non-condensing)</td></tr></tbody></table>
  • rank_math_news_sitemap_robots: index
  • rank_math_robots: a:1:{i:0;s:5:"index";}

1-port 802.3at PoE+ to 2-port 802.3af/at Gigabit PoE Extender

» POE-E202

PoE Solution for Breaking RJ45 100m Limitation

PLANET POE-E202 is a 1-port PoE+ to 2-port 802.3af/at Gigabit PoE Extender designed especially for point to multipoint PoE application. The POE-E202 can obtain a maximum of 30-watt PoE power from PoE+ input port and supplies a maximum of 25-watt PoE power budget for two PoE output ports, extending both the Gigabit Ethernet Data and IEEE 802.3at/802.3af Power over Ethernet over the standard 100m (328 ft.) Cat. 5/5e/6 UTP cable to up to two 200m powered devices at the same time.

The POE-E202 provides a simple solution for adding PoE ports without running more cabling and achieves more flexible network applications without requiring an external power adapter.

Plug and Play Installation

The POE-E202 is quite easy to be installed by simple plug and play. It is used between a power source equipment (PSE) and a powered device (PD). The POE-E202 injects power to the PD without affecting the data transmission performance. The POE-E202 offers a cost-effective and quick solution to doubling the standard range of PoE from 100 to 200 meters. The POE-E202 is designed in a compact box containing three RJ45 ports, of which one “PoE IN” port functions as PoE (Data and Power) input and the other two “PoE OUT” ports function as PoE output. The “PoE OUT” port is also the power injector that transmits DC voltage over the Cat5/5e/6 cable and transfers data and power simultaneously between the PSE and PD.

One Power Sourcing for Multi Powered Devices Solution

Is 100-meter cable long enough for a wide range of IP surveillance deployments? The answer is certainly not.  To achieve the benefits of IP surveillance and the long-distance IP camera distribution, PLANET POE-E202 is quite a useful Gigabit PoE extender if users have most of their network already set up, and hope to expand network communications and overcome cable distance limitations offering connections to devices in locations where traditional networking does not allow.

Physical Port

  • 3-port 10/100/1000BASE-T Gigabit RJ45 
    • 1-port data + power input
    • 2-port data + power output

Power over Ethernet

  • 1-port data + power input
    • Complies with IEEE 802.3at Power over Ethernet Plus end-span/mid-span PD
    • Supports PoE input power up to 30.8 watts
  • 2-port data + power output
    • Complies with IEEE 802.3af/IEEE 802.3at Power over Ethernet end-span PSE
    • Up to 2 IEEE 802.3af/802.3at devices powered
    • Supports PoE power up to 25 watts for each PoE port
    • Auto detects powered device (PD)
  • Extends the range of PoE to an additional 100 meters (328ft.)
  • Forwards both Ethernet data and PoE power to remote device 

 

Layer 2 Features

  • Hardware-based 10/100/1000Mbps auto-negotiation and auto MDI/MDI-X
  • Integrates address look-up engine, supporting 2K absolute MAC addresses
  • 10K iumbo packet support
  • IEEE 802.1Q VLAN transparency
  • Features Store-and-Forward mode with wire-speed filtering and forwarding rates
  • IEEE 802.3x flow control for full duplex operation and back pressure for half duplex operation
  • Automatic address learning and address aging
  • Supports CSMA/CD protocol

 

Case and Installation

  • No external power cable installation required
  • Made of metal, desktop size design
  • Wall-mountable, Plug-and-Play installation
  • 0 ~ 50 degrees C operating temperature
Interfaces
PoE IN1 x 10/100/1000BASE-T Ethernet with IEEE 802.3at PoE “Data + DC power” in
auto MDI/MDI-X, auto-negotiation RJ45 connector
PoE OUT2 x 10/100/1000BASE-T Ethernet with IEEE 802.3at/802.3af PoE “Data + DC power” out
auto MDI/MDI-X, auto-negotiation RJ45 connector
Power over Ethernet
PoE Standard“PoE In” Port
IEEE 802.3at Power over Ethernet Plus end-span/mid-span PD class 4 PD
Per “PoE Out” Port
IEEE 802.3at Power over Ethernet Plus end-span PSE
IEEE 802.3af Power over Ethernet end-span PSE
PoE Power Supply TypeEnd-span (Type A)
PoE Power“PoE In” Port
52~56V DC, max. 30.8 watts
Per “PoE Out” Port
44~55V DC, max. 25 watts
Power Pin Assignment“PoE In” Port
1/2 (+), 3/6 (-); 4/5 (+), 7/8 (-)
Per “PoE Out” Port
1/2 (+), 3/6 (-)
Hardware Specifications
Data Rate10/100/1000Mbps
MAC Address Table2K
Data Buffer2Mbits
Switch ArchitectureStore-and-Forward
Switch Fabric6Gbps
Switch Throughput4.46Mpps @ 64 bytes
Jumbo Frame10KB
Flow ControlIEEE 802.3x pause frame for full duplex
Back pressure for half duplex
LED Indicators“PoE In” Port: PoE-in-Use x 1 (amber), LNK/ACT x 1 (green)
“PoE Out” Port 1: PoE-in-Use x 1 (amber), LNK/ACT x 1 (green)
“PoE Out” Port 2: PoE-in-Use x 1 (amber), LNK/ACT x 1 (green)
ProtectionESD (Ethernet): 2KV (TBD)
Surge (EFT for power) : 2KV (TBD)
EnclosureMetal
InstallationWall mountable
Dimensions (W x D x H)140 x 76.7 x 27.7 mm
Weight258g
Power RequirementsIEEE 802.3at compliant with voltage within 52V-56V DC
Power Consumption1.6 watts/5.5BTU (System on with PoE input)
2.2 watts/7.5BTU (Ethernet full loading without PoE function)
36 watts/122.8BTU (Full loading with PoE function)
Network Cable10BASE-T: 4-pair UTP Cat. 5 up to 100m (328ft)
100BASE-TX: 4-pair UTP Cat. 5 up to 100m (328ft)
1000BASE-T: 4-pair UTP Cat. 5e, 6, up to 100m (328ft)
EIA/TIA-568 100-ohm STP (100m, 328ft)
Standard Conformance
Regulatory ComplianceFCC Part 15 Class A, CE
Standard ComplianceIEEE 802.3 10BASE-T Ethernet
IEEE 802.3u 100BASE-TX Fast Ethernet
IEEE 802.3ab 1000BASE-T Gigabit Ethernet
IEEE 802.3af Power over Ethernet
IEEE 802.3at Power over Ethernet Plus
IEEE 802.3x Flow Control
Environment
OperatingTemperature: 0 ~ 50 degrees C
Relative Humidity: 5 ~ 95% (non-condensing)
StorageTemperature: -10 ~ 70 degrees C
Relative Humidity: 5 ~ 95% (non-condensing)
DateVersionDescriptionDownload
2022/21/101.0

POE-E202v2

 Download Icon
DateVersionDescriptionDownload
2022/14/101.1

Release for hardware version 2.0.

 Download Icon
DateVersionDescriptionDownload
2022/05/122.0

Release for hardware version 2.0.

 Download Icon

Photo

Model

Description

POE-E201

IEEE 802.3at Power over Gigabit Ethernet Extender

Ordering Information

POE-E202

1-port 802.3at PoE+ to 2-port 802.3af/at Gigabit PoE Extender

Ordering Information

POE-E202

1-port 802.3at PoE+ to 2-port 802.3af/at Gigabit PoE Extender
                       

Subscribe to PLANET e Newsletter

Receive the latest product information and company news!