Product Meta

  • product_code: VC-231GP
  • product_editor_4418_tab_content: <strong>Point-to-Point Application -- LAN to LAN Connection</strong> Two sets of the VC-231G/VC-231GP could be used to link two local area networks that are located in a different place. Through the normal telephone line, the <strong>150/150Mbps</strong> (G.INP, Sym, 8dB) symmetric backbone can be set up, but one VDSL2 Bridge must be Master (<strong>CO mode</strong>) and the other one is Slave (<strong>CPE mode</strong>). <img style="display: block; margin-left: auto; margin-right: auto;" src="https://www.planet.com.sa/planet-storage/2025/01/VC-231GP-3.png" alt="" width="700" height="397" />   <strong>Point-to-Multipoint Application -- Connect to IP DSLAM</strong> To build a local Internet in apartments, hotels and campuses and hospitality environments, it requires: <ul> <li>The multi-port VDSL2 IP DSLAM or VDSL2 switch (for example, PLANET VC-820M) operates as a CO Master and needs to be placed in the wiring center (MDF room) and connects to the telephone line system.</li> <li>On the other hand, it needs to install one or many CPE Slaves (the VC-231GP) on the individual client side and connect to the multi-port Master through the telephone lines.</li> </ul> <img style="display: block; margin-left: auto; margin-right: auto;" src="https://www.planet.com.sa/planet-storage/2025/01/VC-231GP-1.png" alt="" width="700" height="366" />
  • product_editor_4418_tab_enabled: yes
  • product_editor_4418_tab_content_changed: yes
  • product_editor_4418_tab_title: Applications
  • product_editor_4421_tab_content: <p style="box-sizing: border-box; margin-top: 0px; margin-bottom: 1rem; color: #212529; font-family: 'Didact Gothic', Arial, 'Microsoft JhengHei', sans-serif; font-size: 16px;"><span style="box-sizing: border-box; color: #5070ab;"><span style="box-sizing: border-box; font-weight: bolder;">Physical Ports</span></span></p> <ul style="box-sizing: border-box; margin: 0px;"> <li style="box-sizing: border-box;"><span style="color: #212529; font-family: 'Didact Gothic', Arial, 'Microsoft JhengHei', sans-serif;"><span style="font-size: 16px;">1-port 10/100/1000BASE-T RJ45 with IEEE 802.3af/802.3at PoE Injector</span></span></li> <li style="box-sizing: border-box;"><span style="color: #212529; font-family: 'Didact Gothic', Arial, 'Microsoft JhengHei', sans-serif;"><span style="font-size: 16px;">1 RJ11, connector for xDSL port with VDSL2 or ADSL2+ connection</span></span></li> </ul> <p style="box-sizing: border-box; margin-top: 0px; margin-bottom: 1rem; color: #212529; font-family: 'Didact Gothic', Arial, 'Microsoft JhengHei', sans-serif; font-size: 16px;"><span style="box-sizing: border-box; color: #5070ab; font-weight: bold;">Power over Ethernet</span></p> <ul style="box-sizing: border-box; margin: 0px;"> <li style="box-sizing: border-box;"><span style="color: #212529; font-family: 'Didact Gothic', Arial, 'Microsoft JhengHei', sans-serif;"><span style="font-size: 16px;">Complies with IEEE 802.3at/af PoE Plus end-span PSE</span></span></li> <li style="box-sizing: border-box;"><span style="color: #212529; font-family: 'Didact Gothic', Arial, 'Microsoft JhengHei', sans-serif;"><span style="font-size: 16px;">Supports PoE power up to 30.8 watts per PoE port</span></span></li> <li style="box-sizing: border-box;"><span style="color: #212529; font-family: 'Didact Gothic', Arial, 'Microsoft JhengHei', sans-serif;"><span style="font-size: 16px;">Provides DC 52V power over RJ45 Ethernet cable to PD with Ethernet port</span></span></li> <li style="box-sizing: border-box;"><span style="color: #212529; font-family: 'Didact Gothic', Arial, 'Microsoft JhengHei', sans-serif;"><span style="font-size: 16px;">Auto-detects IEEE 802.3at/af equipment and protects devices from being damaged by incorrect installation</span></span></li> <li style="box-sizing: border-box;"><span style="color: #212529; font-family: 'Didact Gothic', Arial, 'Microsoft JhengHei', sans-serif;"><span style="font-size: 16px;">Remote power feeding up to 100m</span></span></li> <li style="box-sizing: border-box;"><span style="color: #212529; font-family: 'Didact Gothic', Arial, 'Microsoft JhengHei', sans-serif;"><span style="font-size: 16px;">IEEE 802.3at/af splitter devices compatible</span></span></li> </ul> <p style="box-sizing: border-box; margin-top: 0px; margin-bottom: 1rem; color: #212529; font-family: 'Didact Gothic', Arial, 'Microsoft JhengHei', sans-serif; font-size: 16px;"><span style="box-sizing: border-box; color: #5070ab; font-weight: bold;">VDSL2 Features</span></p> <ul style="box-sizing: border-box; margin: 0px;"> <li style="box-sizing: border-box;"><span style="color: #212529; font-family: 'Didact Gothic', Arial, 'Microsoft JhengHei', sans-serif;"><span style="font-size: 16px;">VDSL2 stand-alone transceiver for simple bridge modem application</span></span></li> <li style="box-sizing: border-box;"><span style="color: #212529; font-family: 'Didact Gothic', Arial, 'Microsoft JhengHei', sans-serif;"><span style="font-size: 16px;">Cost-effective bridge function to connect two Ethernet LANs</span></span></li> <li style="box-sizing: border-box;"><span style="color: #212529; font-family: 'Didact Gothic', Arial, 'Microsoft JhengHei', sans-serif;"><span style="font-size: 16px;">Point-to-multipoint application: Compatible with PLANET and third-party VDSL2 IP DSLAM for last-mile solution</span></span></li> <li style="box-sizing: border-box;"><span style="color: #212529; font-family: 'Didact Gothic', Arial, 'Microsoft JhengHei', sans-serif;"><span style="font-size: 16px;">Point-to-point application: LAN to LAN extension over phone wire</span></span></li> <li style="box-sizing: border-box;"><span style="color: #212529; font-family: 'Didact Gothic', Arial, 'Microsoft JhengHei', sans-serif;"><span style="font-size: 16px;">Up to 150/150Mbps bandwidth (in G.INP, Sym, 8dB mode)</span></span></li> <li style="box-sizing: border-box;"><span style="color: #212529; font-family: 'Didact Gothic', Arial, 'Microsoft JhengHei', sans-serif;"><span style="font-size: 16px;">Voice and data communication can be shared simultaneously based on the existing telephone wire with distance up to 1.4km</span></span></li> <li style="box-sizing: border-box;"><span style="color: #212529; font-family: 'Didact Gothic', Arial, 'Microsoft JhengHei', sans-serif;"><span style="font-size: 16px;">ITU-T G.993.2 VDSL2 standard</span></span></li> <li style="box-sizing: border-box;"><span style="color: #212529; font-family: 'Didact Gothic', Arial, 'Microsoft JhengHei', sans-serif;"><span style="font-size: 16px;">ITU-T G.993.5 G.Vectoring and G.INP</span></span></li> <li style="box-sizing: border-box;"><span style="color: #212529; font-family: 'Didact Gothic', Arial, 'Microsoft JhengHei', sans-serif;"><span style="font-size: 16px;">DMT-based coding technology </span></span></li> <li style="box-sizing: border-box;"><span style="color: #212529; font-family: 'Didact Gothic', Arial, 'Microsoft JhengHei', sans-serif;"><span style="font-size: 16px;">CO/CPE mode selectable via DIP switch</span></span></li> <li style="box-sizing: border-box;"><span style="color: #212529; font-family: 'Didact Gothic', Arial, 'Microsoft JhengHei', sans-serif;"><span style="font-size: 16px;">Selectable target band plan (symmetric and asymmetric) and SNR margin</span></span></li> <li style="box-sizing: border-box;"><span style="color: #212529; font-family: 'Didact Gothic', Arial, 'Microsoft JhengHei', sans-serif;"><span style="font-size: 16px;">Supports IEEE 802.1Q VLAN tag transparency</span></span></li> </ul>   <p style="box-sizing: border-box; margin-top: 0px; margin-bottom: 1rem; color: #212529; font-family: 'Didact Gothic', Arial, 'Microsoft JhengHei', sans-serif; font-size: 16px;"><span style="box-sizing: border-box; color: #5070ab; font-weight: bold;">Hardware and Installation</span></p> <ul style="box-sizing: border-box; margin: 0px;"> <li style="box-sizing: border-box;"><span style="color: #212529; font-family: 'Didact Gothic', Arial, 'Microsoft JhengHei', sans-serif;"><span style="font-size: 16px;">Compact size, wall-mountable design; ideal solution for space-limited locations</span></span></li> <li style="box-sizing: border-box;"><span style="color: #212529; font-family: 'Didact Gothic', Arial, 'Microsoft JhengHei', sans-serif;"><span style="font-size: 16px;">Advantage of minimum installation time (Simply by Plug and Play)</span></span></li> <li style="box-sizing: border-box;"><span style="color: #212529; font-family: 'Didact Gothic', Arial, 'Microsoft JhengHei', sans-serif;"><span style="font-size: 16px;">Metal case, good for heat sinking</span></span></li> <li style="box-sizing: border-box;"><span style="color: #212529; font-family: 'Didact Gothic', Arial, 'Microsoft JhengHei', sans-serif;"><span style="font-size: 16px;">Supports extensive LED indicators for network diagnosis</span></span></li> <li style="box-sizing: border-box;"><span style="color: #212529; font-family: 'Didact Gothic', Arial, 'Microsoft JhengHei', sans-serif;"><span style="font-size: 16px;">Additional POTS splitter to share voice and data</span></span></li> <li style="box-sizing: border-box;"><span style="color: #212529; font-family: 'Didact Gothic', Arial, 'Microsoft JhengHei', sans-serif;"><span style="font-size: 16px;">Supports 6KV DC Ethernet ESD protection</span></span></li> </ul>
  • product_editor_4421_tab_enabled: yes
  • product_editor_4421_tab_content_changed: yes
  • product_editor_4421_tab_title: Key Features
  • product_editor_4422_tab_content:   <div class="table-responsive"> <table class="common_table_sky" style="width: 100%;"> <thead> <tr> <th colspan="2">Hardware Specifications</th> </tr> </thead> <tbody> <tr> <td class="align-middle">LAN Port</td> <td>1 10/100/1000BASE-T RJ45 auto-MDI/MDI-X port</td> </tr> <tr> <td class="align-middle">VDSL Port</td> <td>1 VDSL2 RJ11 female phone jack Twisted-pair telephone wires (AWG-24 or better) up to 1.4km</td> </tr> <tr> <td class="align-middle">Phone Port</td> <td>Additional splitter for POTS connection</td> </tr> <tr> <td class="align-middle">DIP Switch & Functionality</td> <td>4-position DIP switch ■ CO or CPE mode selectable ■ Selectable G.INP and interleaved mode ■ Selectable target Band plan ■ Selectable target SNR mode</td> </tr> <tr> <td class="align-middle">LED Indicators</td> <td>1 Power: <span style="color: green;"><b>Green</b></span> 1 1000BASE-T LNK/ACT: <span style="color: green;"><b>Green</b></span> 1 100BASE-TX LNK/ACK: <span style="color: green;"><b>Green</b></span> 1 VDSL: <span style="color: green;"><b>Green</b></span> 1 CO: <span style="color: green;"><b>Green</b></span> 1 CPE: <span style="color: green;"><b>Green</b></span> 1 PoE-in-use: <span style="color: #ffbf00;"><b>Amber</b></span></td> </tr> <tr> <td class="align-middle">ESD Protection</td> <td>6KV DC</td> </tr> <tr> <td class="align-middle">Enclosure</td> <td>Metal</td> </tr> <tr> <td class="align-middle">Installation</td> <td>Wall mount or DIN rail with optional kit</td> </tr> <tr> <td class="align-middle">Dimensions (W x D x H)</td> <td>94 x 70.3 x 26.2 mm</td> </tr> <tr> <td class="align-middle">Weight</td> <td>206g</td> </tr> <tr> <td class="align-middle">Power Requirements</td> <td>DC 54V, 0.74A external power</td> </tr> <tr> <td class="align-middle">Power Consumption (VDSL2 + Ethernet + PoE)</td> <td>CO Mode: 32.4 watts/110BTU CPE Mode : 32 watts/109BTU</td> </tr> </tbody> <thead> <tr> <th colspan="2">Power Over Ethernet</th> </tr> </thead> <tbody> <tr> <td class="align-middle">PoE Standard</td> <td>IEEE 802.3at PoE+ PSE</td> </tr> <tr> <td class="align-middle">PoE Power Output Budget</td> <td>DC 52V, 30 watts</td> </tr> <tr> <td class="align-middle">PoE Power Supply Type</td> <td>End-span</td> </tr> <tr> <td class="align-middle">Power PIN Assignment</td> <td>1/2(+), 3/6(-)</td> </tr> </tbody> <thead> <tr> <th colspan="2">Switch Specifications</th> </tr> </thead> <tbody> <tr> <td class="align-middle">Switch Processing Scheme</td> <td>Store-and-Forward</td> </tr> <tr> <td class="align-middle">Address Table</td> <td>2K entries</td> </tr> <tr> <td class="align-middle">Flow Control</td> <td>Back pressure for half duplex IEEE 802.3x pause frame for full duplex</td> </tr> <tr> <td class="align-middle">Maximum Packet Size</td> <td>1522 bytes</td> </tr> </tbody> <thead> <tr> <th colspan="2">System Specifications</th> </tr> </thead> <tbody> <tr> <td class="align-middle">VDSL Compliance</td> <td><b>VDSL</b>-DMT ■ ITU-T G.993.1 VDSL ■ ITU-T G.997.1 ■ ITU-T G.993.2 VDSL2 (Profile 17a/30a support) ■ ITU-T G.993.5 <b>G.Vectoring</b> ■ ITU-T G.998 ■ G.INP</td> </tr> <tr> <td class="align-middle">ADSL Compliance</td> <td>Capable of <b>ADSL2/2+</b> standard ■ ITU G.992.3 G.dmt.bis ■ ITU G.992.5 G.dmt.bisplus Data Rate: Up to 24Mbps</td> </tr> <tr> <td class="align-middle">Performance* (Downstream/Upstream)</td> <td> <ul> <li><b>Interleave, Asym, 8dB</b></li> </ul> 200M ----> 190Mbps/90Mbps 400M ----> 163Mbps/64Mbps 600M ----> 110Mbps/34Mbps 800M ----> 73Mbps/18Mbps 1000M --> 49Mbps/10Mbps 1200M --> 39Mbps/8Mbps 1400M --> 25Mbps/6Mbps <ul> <li><b>Interleave, Sym, 8dB</b></li> </ul> 200M ----> 149Mbps/141Mbps 400M ----> 116Mbps/115Mbps 600M ----> 72Mbps/70Mbps 800M ----> 45Mbps/44Mbps 1000M --> 26Mbps/16Mbps 1200M --> 26Mbps/12Mbps 1400M --> 29Mbps/12Mbps <ul> <li><b>G.INP, Asym, 8dB</b></li> </ul> 200M ----> 192Mbps/93Mbps 400M ----> 159Mbps/64Mbps 600M ----> 106Mbps/37Mbps 800M ----> 68Mbps/19Mbps 1000M --> 49Mbps/8Mbps 1200M --> 29Mbps/8Mbps 1400M --> 26Mbps/6Mbps <ul> <li><b>G.INP, Sym, 8dB</b></li> </ul> 200M ----> 150Mbps/150Mbps 400M ----> 114Mbps/113Mbps 600M ----> 69Mbps/69Mbps 800M ----> 49Mbps/39Mbps 1000M --> 27Mbps/24Mbps 1200M --> 26Mbps/12Mbps 1400M --> 21Mbps/11Mbps <ul> <li><b>Interleave, Asym, 12dB</b></li> </ul> 200M ----> 177Mbps/83Mbps 400M ----> 145Mbps/57Mbps 600M ----> 92Mbps/31Mbps 800M ----> 59Mbps/15Mbps 1000M --> 44Mbps/10Mbps 1200M --> 32Mbps/6Mbps 1400M --> 22Mbps/3Mbps <ul> <li><b>Interleave, Sym, 12dB</b></li> </ul> 200M ----> 136Mbps/129Mbps 400M ----> 100Mbps/101Mbps 600M ----> 58Mbps/57Mbps 800M ----> 42Mbps/36Mbps 1000M --> 23Mbps/12Mbps 1200M --> 23Mbps/10Mbps 1400M --> 17Mbps/11Mbps <ul> <li><b>G.INP, Asym, 12dB</b></li> </ul> 200M ----> 177Mbps/85Mbps 400M ----> 144Mbps/51Mbps 600M ----> 87Mbps/29Mbps 800M ----> 55Mbps/15Mbps 1000M --> 40Mbps/8Mbps 1200M --> 38Mbps/8Mbps 1400M --> 26Mbps/4Mbps <ul> <li><b>G.INP, Sym, 12dB</b></li> </ul> 200M ----> 136Mbps/133Mbps 400M ----> 97Mbps/102Mbps 600M ----> 54Mbps/56Mbps 800M ----> 40Mbps/35Mbps 1000M --> 24Mbps/22Mbps 1200M --> 24Mbps/9Mbps 1400M --> 18Mbps/12Mbps</td> </tr> </tbody> <thead> <tr> <th colspan="2">Standards Conformance</th> </tr> </thead> <tbody> <tr> <td class="align-middle">Standards Conformance</td> <td>IEEE 802.3 Ethernet IEEE 802.3u Fast Ethernet IEEE 802.3ab Gigabit Ethernet IEEE 802.3x Full-duplex flow control IEEE 802.1p Class of Service IEEE 802.3af Power over Ethernet IEEE 802.3at Power over Ethernet Plus ITU-T G.993.1 VDSL ITU-T G.997.1 ITU-T G.993.2 VDSL2 (Profile 17a/30a support) ITU-T G.993.5 G.Vectoring & G.INP ITU-T G.998</td> </tr> </tbody> <thead> <tr> <th colspan="2">xDSL Compatibility</th> </tr> </thead> <tbody> <tr> <td class="align-middle">VDSL2</td> <td>VC-231G VC-234G VC-231 VC-234 VC-820M VDR-301N</td> </tr> </tbody> <thead> <tr> <th colspan="2">Environment</th> </tr> </thead> <tbody> <tr> <td class="align-middle">Temperature</td> <td>Operating: 0~50 degrees C Storage: -10~70 degrees C</td> </tr> <tr> <td class="align-middle">Humidity</td> <td>Operating: 5~95% (non-condensing) Storage: 5~95% (non-condensing)</td> </tr> </tbody> </table> </div>
  • product_editor_4422_tab_enabled: yes
  • product_editor_4422_tab_content_changed: yes
  • product_editor_4422_tab_title: Specifications
  • ekit_post_views_count: 572
  • product_editor_4418_tab_sticky_width: pw-content-1
  • product_editor_4418_tab_sticky_position: pw-left-stick
  • product_editor_4421_tab_sticky_width: pw-content-1
  • product_editor_4421_tab_sticky_position: pw-left-stick
  • product_editor_4422_tab_sticky_width: pw-content-1
  • product_editor_4422_tab_sticky_position: pw-left-stick
  • product_editor_4423_tab_content:
  • product_editor_4423_tab_content_changed: yes
  • product_editor_4423_tab_enabled: yes
  • product_editor_4423_tab_title: Downloads
  • product_editor_4423_tab_sticky_width: pw-content-1
  • product_editor_4423_tab_sticky_height: 1
  • product_editor_4423_tab_sticky_position: pw-left-stick
  • product_editor_4424_tab_content:
  • product_editor_4424_tab_content_changed: yes
  • product_editor_4424_tab_enabled: yes
  • product_editor_4424_tab_title: Related Products
  • product_editor_4424_tab_sticky_width: pw-content-1
  • product_editor_4424_tab_sticky_height: 1
  • product_editor_4424_tab_sticky_position: pw-left-stick
  • total_sales: 0
  • accessories_table: <table class="common_table"> <thead> <tr> <th colspan="2">Ordering Information</th> </tr> </thead> <tbody> <tr> <td class="text-center align-middle"> <h3 class="h6 m-0">VC-231GP</h3> </td> <td>1-Port 10/100/1000T 802.3at PoE+ Ethernet to VDSL2 Converter (30a profile w/G.Vectoring)</td> </tr> </tbody> </table>       <div class="table-responsive"> <div class="table-responsive"> <div class="table-responsive"></div> </div> </div>
  • product_label:
  • prouduct_loop_image_transparent_bg_:
  • 6_features_images: a:6:{i:0;s:5:"14688";i:1;s:5:"14687";i:2;s:5:"14686";i:3;s:5:"14685";i:4;s:5:"14684";i:5;s:5:"14683";}
  • datasheet: 1
  • quick_guide:
  • users_manual: 2
  • ec_declaration: 1
  • android_app:
  • driver:
  • firmware:
  • utility:
  • compatible_list:
  • site-sidebar-layout: default
  • ast-site-content-layout: default
  • site-content-style: default
  • site-sidebar-style: default
  • theme-transparent-header-meta: default
  • datasheet_0_date: 20181123
  • datasheet_0_version: 1.0
  • datasheet_0_description: VC-231GP
  • datasheet_0_download_pdf: https://www.planet.com.sa/storage/products/VC-231GP/C-VC-231GP_s.pdf
  • users_manual_0_date: 20210702
  • users_manual_0_version: 1.1
  • users_manual_0_description: Modify contents of user manual.
  • users_manual_0_download_pdf: https://www.planet.com.sa/storage/products/VC-231GP/EM-VC-231GP_v1.1.pdf
  • users_manual_1_date: 20181003
  • users_manual_1_version: 1.0
  • users_manual_1_description: Initial release.
  • users_manual_1_download_pdf: https://www.planet.com.sa/storage/products/VC-231GP/EM-VC-231GP_v1.0.pdf
  • ec_declaration_0_date: 20190107
  • ec_declaration_0_version: 1.0
  • ec_declaration_0_description: EC Declaration.
  • ec_declaration_0_download_pdf: https://www.planet.com.sa/storage/products/VC-231GP/VC-231GP.pdf
  • astra-migrate-meta-layouts: set
  • applications_tab: <p><strong>Ethernet Distance Extension</strong><p>Two VC-231GP converters can act as a standalone pair which is good for Ethernet distance extension over the existing telephone wires. With just one pair of AWG-24 copper wires, two Ethernet networks can be easily connected to each other with a maximum data transmission rate of 200Mbps. The telephone service can still be used while the VC-231GP CO/CPE is in operation. The two solutions listed below are typical applications for the Ethernet over VDSL2 bridge.</p><p> </p><p><img style="display: block; margin-left: auto; margin-right: auto;" src="https://www.planet.com.sa/planet-storage/2025/01/VC-231GPv2-2.png" alt="" width="700" height="799"> </p><p><strong>MTU/MDU/Hospitality Solution</strong></p><p>The VC-231GP is a perfect solution to quickly providing cost-effective yet high-speed network services to multi-unit buildings such as residential buildings (multi-dwelling units), commercial (multi-tenant units) buildings, hotels and hospitals. By utilizing the existing telephony infrastructure, a new network installation can be easily built, without requiring new wiring. With a transmission rate of up to <strong>281/59Mbps (G.INP, Asym, 8dB)</strong>, VoD, IP telephony and various broadband services can be easily provided.</p><p> <img style="display: block; margin-left: auto; margin-right: auto;" src="https://www.planet.com.sa/planet-storage/2025/01/VC-231GPv2-5.png" alt="" width="700" height="670"></p><p><strong>Last Mile of FTTx Deployment</strong></p><p>The VC-231GP is an ideal solution for FTTx (Fiber to the Building, Fiber to the Campus or Fiber to the Node) applications.  It supports high-bandwidth VDSL2 over the existing telephone wires in the “<strong>last mile</strong>” from the ISP/telecom/service provider’s fiber node to the buildings and customers’ apartments. The 10/100/1000Mbps port of the VC-231GP can be directly connected to a PC or Ethernet devices such as Ethernet switches or broadband routers. It is excellent for phone line network built for Internet access as each room or house can use the existing phone line to transmit data. This allows the whole building to share a single Internet connection can to the wider area network at a minimum cost.</p><p><img style="display: block; margin-left: auto; margin-right: auto;" src="https://www.planet.com.sa/planet-storage/2025/01/VC-231GPv2-3.png" alt="" width="700" height="405"></p></p>
  • key_features_tab: <p><strong>Physical Port</strong><ul> <li>1-port 10/100/1000BASE-T RJ45 with IEEE 802.3af/802.3at PoE Injector</li> <li>One RJ11 female phone jack for VDSL2 Transmission</li> </ul><p> </p><p><strong>Power Over Ethernet</strong></p><ul> <li>Complies with IEEE 802.3at/af PoE Plus end-span PSE</li> <li>Supports PoE power up to 30.8 watts per PoE port</li> <li>Provides DC 54V power over RJ45 Ethernet cable to PD with Ethernet port</li> <li>Auto-detects IEEE 802.3at/af equipment and protects devices from being damaged by incorrect installation</li> <li>Remote power feeding up to 100m</li> <li>IEEE 802.3at/af splitter devices compatible</li> </ul><p> </p><p><strong>VDSL2 Features</strong></p><ul> <li>ITU-T G.993.2 <strong>VDSL2 Profile 17a/30a/35b</strong> </li> <li>ITU-T G.993.5 G.vectoring and G.INP</li> <li>DMT-based coding technology</li> <li>Additional splitter to share voice and data</li> <li>CO/CPE mode selectable via DIP switch</li> <li>Selectable target band plan and SNR margin</li> <li>Up to 200/200Mbps bandwidth (in <strong>G.INP, Sym, 8dB</strong> mode)</li> <li>Voice and data communication can be shared simultaneously based on the existing telephone wire</li> <li>Used in pairs to extend Point-to-Point connection up to 1.4km</li> </ul><p> </p><p><strong>Layer 2 Features</strong></p><ul> <li>Complies with IEEE 802.3, 10BASE-T, IEEE 802.3u, 100BASE-TX, IEEE 802.3ab 1000BASE-T Ethernet standards</li> <li>High-performance Store and Forward architecture, broadcast storm control and runt/CRC filtering eliminate erroneous packets to optimize the network bandwidth</li> <li>Integrated address look-up engine, supporting 1K absolute MAC addresses</li> <li>1522bytes packet size</li> <li>Automatic address learning and address aging</li> <li>IEEE 802.1Q VLAN transparency</li> </ul><p> </p><p><strong>Hardware and Installation</strong></p><ul> <li>Compact size, wall-mountable design; ideal solution for space-limited locations</li> <li>Advantage of minimum installation time (Simply by Plug and Play)</li> <li>Metal case, good for heat sinking</li> <li>Supports extensive LED indicators for network diagnosis</li> <li>DIN-rail installation (optional)</li> <li>Additional POTS splitter to share voice and data</li> <li>Supports 6KV DC Ethernet ESD protection</li> </ul></p>
  • specifications_tab: <table style="width:100%;" class="common_table_sky"><thead><tr><th colspan="2">Hardware Specifications</th></tr></thead><tbody><tr><td class="align-middle">Hardware Version</td><td>2</td></tr><tr><td class="align-middle">LAN Ports</td><td>1 10/100/1000BASE-T RJ45 auto-MDI/MDI-X port</td></tr><tr><td class="align-middle">VDSL Port</td><td>1 VDSL2 RJ11 female phone jack<br /> Twisted-pair telephone wires (AWG-24 or better) up to 1.4km</td></tr><tr><td class="align-middle">DIP Switch & Functionality</td><td>4-position DIP switch<br />  <b>CO</b> or <b>CPE</b> mode selectable<br />  Selectable <b>G.INP</b> and <b>interleaved</b> mode<br />  Selectable target <b>Band plan</b><br />  Selectable target <b>SNR mode</b></td></tr><tr><td class="align-middle">Phone Port</td><td>Additional splitter for POTS connection</td></tr><tr><td class="align-middle">Dimensions (W x D x H)</td><td>94 x 70.3 x 26.2 mm</td></tr><tr><td class="align-middle">Weight</td><td>214g</td></tr><tr><td class="align-middle">Power Requirements</td><td>DC 54V, 0.74A external power</td></tr><tr><td class="align-middle">Power Consumption</td><td>34.5 watts/117BTU</td></tr><tr><td class="align-middle">LED Indicators</td><td>1 x power: <font color="Green"><b>Green</b></font><br /> 1 x 10/100/1000BASE-T LNK/ACT: <font color="Green"><b>Green</b></font><br /> 1 x 10/100/1000BASE-T PoE-in-Use: <font color="Orange"><b>Amber</b></font><br /> 1 x VDSL: <font color="Green"><b>Green</b></font><br /> 1 x CO: <font color="Green"><b>Green</b></font><br /> 1 x CPE: <font color="Green"><b>Green</b></font></td></tr><tr><td class="align-middle">Housing</td><td>Metal</td></tr><tr><td class="align-middle">Installation</td><td>Wall-mount or DIN-rail installation (optional)</td></tr></tbody><thead><tr><th colspan="2">Power over Ethernet Specifications</th></tr></thead><tbody><tr><td class="align-middle">PoE Standard</td><td>IEEE 802.3at PoE+ PSE</td></tr><tr><td class="align-middle">PoE Power Output Budget</td><td>DC 54V, 30 watts</td></tr><tr><td class="align-middle">PoE Power Supply Type</td><td>End-span</td></tr><tr><td class="align-middle">Power PIN Assignment</td><td>1/2(+), 3/6(-)</td></tr></tbody><thead><tr><th colspan="2">Switch Specifications</th></tr></thead><tbody><tr><td class="align-middle">Switch Processing Scheme</td><td>Store-and-Forward</td></tr><tr><td class="align-middle">Address Table</td><td>1K entries</td></tr><tr><td class="align-middle">Maximum Packet Size</td><td>1522bytes</td></tr></tbody><thead><tr><th colspan="2">Standards Conformance</th></tr></thead><tbody><tr><td class="align-middle">VDSL Compliance</td><td><b>VDS</b>L-DMT<br />  ITU-T G.993.1 VDSL<br />  ITU-T G.997.1<br />  ITU-T G.993.2 VDSL2 (Profile 17a/30a/35b support)<br />  ITU-T G.993.5 <b>.vectoring</b><br />  ITU-T G.998<br />  G.INP</td></tr><tr><td class="align-middle">ADSL Compliance</td><td>Capable of <b>ADSL2/2+</b> standard<br />  ITU G.992.3 G.dmt.bis<br />  ITU G.992.5 G.dmt.bisplus<br /> Data Rate: Up to 24Mbps</td></tr><tr><td class="align-middle">Standards Compliance</td><td>IEEE 802.3 Ethernet <br /> IEEE 802.3u Fast Ethernet<br /> IEEE 802.3ab Gigabit Ethernet<br /> IEEE 802.1p Class of Service<br /> IEEE 802.3af Power over Ethernet<br /> IEEE 802.3at Power over Ethernet Plus<br /> ITU-T G.993.1 VDSL<br /> ITU-T G.997.1<br /> ITU-T G.993.2 VDSL2 (Profile 17a/30a/35b support)<br /> ITU-T G.993.5 G.Vectoring & G.INP<br /> ITU-T G.998</td></tr><tr><td class="align-middle">Regulatory Compliance</td><td>FCC Part 15 Class A, CE</td></tr></tbody><thead><tr><th colspan="2">Environment</th></tr></thead><tbody><tr><td class="align-middle">Temperature</td><td>Operating: 0~50 degrees C<br /> Storage: -10~70 degrees C</td></tr><tr><td class="align-middle">Humidity</td><td>Operating: 5~95% (non-condensing)<br /> Storage: 5~95% (non-condensing)</td></tr></tbody><thead><tr><th colspan="2">Performance</th></tr></thead><tbody><tr><td class="align-middle">RJ11 Performance*(Downstream/Upstream)</td><td><table width="417" border="1" cellspacing="0" cellpadding="0"><tr><td width="56" rowspan="3"><div align="center">Distance<br>(meter)</div></td><td colspan="4"><div align="center">Interleave<br>(Downstream/Upstream: Mbps)</div></td></tr><tr><td colspan="2"><div align="center">Asymmetric</div></td><td colspan="2"><div align="center">Symmetric</div></td></tr><tr><td width="123"><div align="center">8dB</div></td><td width="123"><div align="center">12dB</div></td><td width="123"><div align="center">8dB</div></td><td width="123"><div align="center">12dB</div></td></tr><tr><td bgcolor="#FFFFFF"><div align="center">200m</div></td><td bgcolor="#FFFFFF"><div align="center">254/56</div></td><td bgcolor="#FFFFFF"><div align="center">234/53</div></td><td bgcolor="#FFFFFF"><div align="center">178/160</div></td><td bgcolor="#FFFFFF"><div align="center">163/144</div></td></tr><tr><td bgcolor="#FFFFFF"><div align="center">400m</div></td><td bgcolor="#FFFFFF"><div align="center">197/51</div></td><td bgcolor="#FFFFFF"><div align="center">174/46</div></td><td bgcolor="#FFFFFF"><div align="center">145/122</div></td><td bgcolor="#FFFFFF"><div align="center">104/104</div></td></tr><tr><td bgcolor="#FFFFFF"><div align="center">600m</div></td><td bgcolor="#FFFFFF"><div align="center">112/40</div></td><td bgcolor="#FFFFFF"><div align="center">88/36</div></td><td bgcolor="#FFFFFF"><div align="center">81/72</div></td><td bgcolor="#FFFFFF"><div align="center">67/58</div></td></tr><tr><td bgcolor="#FFFFFF"><div align="center">800m</div></td><td bgcolor="#FFFFFF"><div align="center">77/29</div></td><td bgcolor="#FFFFFF"><div align="center">56/24</div></td><td bgcolor="#FFFFFF"><div align="center">48/47</div></td><td bgcolor="#FFFFFF"><div align="center">36/36</div></td></tr><tr><td bgcolor="#FFFFFF"><div align="center">1000m</div></td><td bgcolor="#FFFFFF"><div align="center">32/7</div></td><td bgcolor="#FFFFFF"><div align="center">28/6</div></td><td bgcolor="#FFFFFF"><div align="center">18/17</div></td><td bgcolor="#FFFFFF"><div align="center">16/15</div></td></tr><tr><td bgcolor="#FFFFFF"><div align="center">1200m</div></td><td bgcolor="#FFFFFF"><div align="center">27/2</div></td><td bgcolor="#FFFFFF"><div align="center">23/5</div></td><td bgcolor="#FFFFFF"><div align="center">14/14</div></td><td bgcolor="#FFFFFF"><div align="center">13/12</div></td></tr><tr><td bgcolor="#FFFFFF"><div align="center">1400m</div></td><td bgcolor="#FFFFFF"><div align="center">18/1</div></td><td bgcolor="#FFFFFF"><div align="center">15/1</div></td><td bgcolor="#FFFFFF"><div align="center">12/6</div></td><td bgcolor="#FFFFFF"><div align="center">9/4</div></td></tr><td width="56" rowspan="3"><div align="center">Distance<br>(meter)</div></td><td colspan="4"><div align="center"> G.INP<br>(Downstream/Upstream: Mbps)</div></td></tr><tr><td colspan="2"><div align="center"> Asymmetric</div></td><td colspan="2"><div align="center">Symmetric</div></td></tr><tr><td width="123"><div align="center">8dB</div></td><td width="123"><div align="center">12dB</div></td><td width="123"><div align="center">8dB</div></td><td width="123"><div align="center">12dB</div></td><tr><td bgcolor="#FFFFFF"><div align="center">200m</div></td><td bgcolor="#FFFFFF"><div align="center">281/59</div></td><td bgcolor="#FFFFFF"><div align="center">246/56</div></td><td bgcolor="#FFFFFF"><div align="center">192/168</div></td><td bgcolor="#FFFFFF"><div align="center">169/144</div></td></tr><tr><td bgcolor="#FFFFFF"><div align="center">400m</div></td><td bgcolor="#FFFFFF"><div align="center">208/53</div></td><td bgcolor="#FFFFFF"><div align="center">180/47</div></td><td bgcolor="#FFFFFF"><div align="center">153/127</div></td><td bgcolor="#FFFFFF"><div align="center">133/104</div></td><tr><td bgcolor="#FFFFFF"><div align="center">600m</div></td><td bgcolor="#FFFFFF"><div align="center">112/42</div></td><td bgcolor="#FFFFFF"><div align="center">84/36</div></td><td bgcolor="#FFFFFF"><div align="center">87/72</div></td><td bgcolor="#FFFFFF"><div align="center">69/56</div></td></tr><tr><td bgcolor="#FFFFFF"><div align="center">800m</div></td><td bgcolor="#FFFFFF"><div align="center">76/30</div></td><td bgcolor="#FFFFFF"><div align="center">56/22</div></td><td bgcolor="#FFFFFF"><div align="center">51/48</div></td><td bgcolor="#FFFFFF"><div align="center">40/34</div></td></tr><tr><td bgcolor="#FFFFFF"><div align="center">1000m</div></td><td bgcolor="#FFFFFF"><div align="center">32/9</div></td><td bgcolor="#FFFFFF"><div align="center">27/6</div></td><td bgcolor="#FFFFFF"><div align="center">18/17</div></td><td bgcolor="#FFFFFF"><div align="center">16/14</div></td></tr><tr><td bgcolor="#FFFFFF"><div align="center">1200m</div></td><td bgcolor="#FFFFFF"><div align="center">27/4</div></td><td bgcolor="#FFFFFF"><div align="center">23/3</div></td><td bgcolor="#FFFFFF"><div align="center">14/14</div></td><td bgcolor="#FFFFFF"><div align="center">12/12</div></td></tr><tr><td bgcolor="#FFFFFF"><div align="center">1400m</div></td><td bgcolor="#FFFFFF"><div align="center">24/2</div></td><td bgcolor="#FFFFFF"><div align="center">21/2</div></td><td bgcolor="#FFFFFF"><div align="center">11/9</div></td><td bgcolor="#FFFFFF"><div align="center">9/6</div></td></tr></table>* The performance data above is for reference only. The actual data rate will vary on the quality of the copper wire and environmental factors.</td></tr></tbody></table>
  • rank_math_news_sitemap_robots: index
  • rank_math_robots: a:1:{i:0;s:5:"index";}
  • rank_math_internal_links_processed: 1

1-Port 10/100/1000T 802.3at PoE+ Ethernet to VDSL2 Converter

» VC-231GP

200/200Mbps Downstream/Upstream, High-performance Gigabit Ethernet over Phone Wire Solution 

PLANET VC-231GP, a new-generation and high-performance Single-port Gigabit Ethernet-over-VDSL2 Converter with PoE injector function and the brand-new VDSL2 Super Vector 35b profile, works well with a pervasive telephone line network with a symmetric data rate of up to 200/200Mbps (G.INP, Sym, 8dB) over a distance of 200m and 11/9Mbps over a long distance of 1.4km. It is based on the two-core networking technology, Gigabit Ethernet and VDSL2 (Very-high-data-rate Digital Subscriber Line 2). The VDSL2 technology offers absolutely the fastest data transmission speed over the existing copper telephone lines without the need of rewiring. 

 

 

 

The VC-231GP forwards the Ethernet data and provides a maximum of 30-watt power output over an additional 100m UTP cable to a remote IP device complied with 802.3af/at PoE PD (powered device) for network deployment, such as PoE IP camera, PoE wireless AP, or PoE IP VoIP phone/door phone. Users have the ability to grow the structure of the current networks simply with even more flexibility with following three advanced technologies:

  • VDSL2/ADSL2+ Digital Subscriber Line technologies
  • Gigabit Ethernet
  • IEEE 802.3at Power over Ethernet Plus

 

 

High-performance Ethernet over VDSL2

Via the latest VDSL2 technology, PLANET VC-231GP offers high-speed access to Internet, up to 200Mbps for both upstream and downstream data transmissions. With integrated support for the ITU-T’s new G.993.5 vectoring technology, the VC-231GP works in conjunction with vectoring-enabled DSLAMs to remove crosstalk interference and improve maximum line bandwidth across the existing copper infrastructure.

 

Implementing with Existing Telephone Copper Wires

The VC-231GP is also a Long Reach Ethernet (LRE) converter providing one RJ45 Ethernet port and one RJ11 phone jack, which is for VDSL2 connection. An additional splitter from the package of the VC-231GP can be used to share the existing phone line with POTS, eliminating the need to replace the existing copper wiring. The VC-231GP can be connected to the additional splitter through the existing RJ11 telephone jack, enabling a high-performance VDSL2 network connection. It is ideal for use as an Ethernet extender within an existing Ethernet network. 

 

Delivering High-demanding Service Connectivity for ISP/Triple Play Devices

The VC-231GP provides an excellent bandwidth demand for the triple play devices for home entertainment and communication. With the asymmetric data transmission of 281/59Mbps (G.INP, Asym, 8dB), the VC-231GP enables many multi-media services to work on the local Internet, such as VoD (video on demand), voice over IP, video phone, IPTV, Internet caching server, distance education, and so on.

 

IEEE 802.3at Power over Ethernet Plus 

The PoE in-line power following the IEEE 802.3at Power over Ethernet Plus standard makes the VC-231GP able to deliver Gigabit speed Ethernet data and up to 30 watts of power to remote PoE PDs over one Cat.5E/6 Ethernet cable. The VC-231GP provides more flexibility in power requirements for all kinds of PDs at affordable installation costs.

 

 

Easy and Flexible Installation 

The Ethernet-over-VDSL2 converter comes with a plug-and-play design and is fully compatible with all kinds of network protocols. Moreover, the operating status of each individual port and the whole system can be watched via the rich diagnostic LEDs on the front panel. The VC-231GP offers two modes, CPE and CO, for application — CPE mode is used at client side and CO mode is at central side. The CPE or CO mode can be adjusted by using a built-in DIP switch. For point-to-point connection, the VC-231G in the CPE mode and the VC-231G in the CO mode must be set up as one pair of converters to perform the connection.

 

ADSL2+ Fallback

For those ISPs providing ADSL broadband service, the VC-231GP can support transmission rates up to 24Mbps downstream and 1Mbps upstream with the ADSL2+ technology. The VC-231GP establishes a stable connection with an ISP and can be switched to VDSL2 after the ISP upgrades its network.

Ethernet Distance Extension

Two VC-231GP converters can act as a standalone pair which is good for Ethernet distance extension over the existing telephone wires. With just one pair of AWG-24 copper wires, two Ethernet networks can be easily connected to each other with a maximum data transmission rate of 200Mbps. The telephone service can still be used while the VC-231GP CO/CPE is in operation. The two solutions listed below are typical applications for the Ethernet over VDSL2 bridge.

 

 

MTU/MDU/Hospitality Solution

The VC-231GP is a perfect solution to quickly providing cost-effective yet high-speed network services to multi-unit buildings such as residential buildings (multi-dwelling units), commercial (multi-tenant units) buildings, hotels and hospitals. By utilizing the existing telephony infrastructure, a new network installation can be easily built, without requiring new wiring. With a transmission rate of up to 281/59Mbps (G.INP, Asym, 8dB), VoD, IP telephony and various broadband services can be easily provided.

 

Last Mile of FTTx Deployment

The VC-231GP is an ideal solution for FTTx (Fiber to the Building, Fiber to the Campus or Fiber to the Node) applications.  It supports high-bandwidth VDSL2 over the existing telephone wires in the “last mile” from the ISP/telecom/service provider’s fiber node to the buildings and customers’ apartments. The 10/100/1000Mbps port of the VC-231GP can be directly connected to a PC or Ethernet devices such as Ethernet switches or broadband routers. It is excellent for phone line network built for Internet access as each room or house can use the existing phone line to transmit data. This allows the whole building to share a single Internet connection can to the wider area network at a minimum cost.

Physical Port

  • 1-port 10/100/1000BASE-T RJ45 with IEEE 802.3af/802.3at PoE Injector
  • One RJ11 female phone jack for VDSL2 Transmission

 

Power Over Ethernet

  • Complies with IEEE 802.3at/af PoE Plus end-span PSE
  • Supports PoE power up to 30.8 watts per PoE port
  • Provides DC 54V power over RJ45 Ethernet cable to PD with Ethernet port
  • Auto-detects IEEE 802.3at/af equipment and protects devices from being damaged by incorrect installation
  • Remote power feeding up to 100m
  • IEEE 802.3at/af splitter devices compatible

 

VDSL2 Features

  • ITU-T G.993.2 VDSL2 Profile 17a/30a/35b 
  • ITU-T G.993.5 G.vectoring and G.INP
  • DMT-based coding technology
  • Additional splitter to share voice and data
  • CO/CPE mode selectable via DIP switch
  • Selectable target band plan and SNR margin
  • Up to 200/200Mbps bandwidth (in G.INP, Sym, 8dB mode)
  • Voice and data communication can be shared simultaneously based on the existing telephone wire
  • Used in pairs to extend Point-to-Point connection up to 1.4km

 

Layer 2 Features

  • Complies with IEEE 802.3, 10BASE-T, IEEE 802.3u, 100BASE-TX, IEEE 802.3ab 1000BASE-T Ethernet standards
  • High-performance Store and Forward architecture, broadcast storm control and runt/CRC filtering eliminate erroneous packets to optimize the network bandwidth
  • Integrated address look-up engine, supporting 1K absolute MAC addresses
  • 1522bytes packet size
  • Automatic address learning and address aging
  • IEEE 802.1Q VLAN transparency

 

Hardware and Installation

  • Compact size, wall-mountable design; ideal solution for space-limited locations
  • Advantage of minimum installation time (Simply by Plug and Play)
  • Metal case, good for heat sinking
  • Supports extensive LED indicators for network diagnosis
  • DIN-rail installation (optional)
  • Additional POTS splitter to share voice and data
  • Supports 6KV DC Ethernet ESD protection

Hardware Specifications
Hardware Version2
LAN Ports1 10/100/1000BASE-T RJ45 auto-MDI/MDI-X port
VDSL Port1 VDSL2 RJ11 female phone jack
Twisted-pair telephone wires (AWG-24 or better) up to 1.4km
DIP Switch & Functionality4-position DIP switch
 CO or CPE mode selectable
 Selectable G.INP and interleaved mode
 Selectable target Band plan
 Selectable target SNR mode
Phone PortAdditional splitter for POTS connection
Dimensions (W x D x H)94 x 70.3 x 26.2 mm
Weight214g
Power RequirementsDC 54V, 0.74A external power
Power Consumption34.5 watts/117BTU
LED Indicators1 x power: Green
1 x 10/100/1000BASE-T LNK/ACT: Green
1 x 10/100/1000BASE-T PoE-in-Use: Amber
1 x VDSL: Green
1 x CO: Green
1 x CPE: Green
HousingMetal
InstallationWall-mount or DIN-rail installation (optional)
Power over Ethernet Specifications
PoE StandardIEEE 802.3at PoE+ PSE
PoE Power Output BudgetDC 54V, 30 watts
PoE Power Supply TypeEnd-span
Power PIN Assignment1/2(+), 3/6(-)
Switch Specifications
Switch Processing SchemeStore-and-Forward
Address Table1K entries
Maximum Packet Size1522bytes
Standards Conformance
VDSL ComplianceVDSL-DMT
 ITU-T G.993.1 VDSL
 ITU-T G.997.1
 ITU-T G.993.2 VDSL2 (Profile 17a/30a/35b support)
 ITU-T G.993.5 .vectoring
 ITU-T G.998
 G.INP
ADSL ComplianceCapable of ADSL2/2+ standard
 ITU G.992.3 G.dmt.bis
 ITU G.992.5 G.dmt.bisplus
Data Rate: Up to 24Mbps
Standards ComplianceIEEE 802.3 Ethernet
IEEE 802.3u Fast Ethernet
IEEE 802.3ab Gigabit Ethernet
IEEE 802.1p Class of Service
IEEE 802.3af Power over Ethernet
IEEE 802.3at Power over Ethernet Plus
ITU-T G.993.1 VDSL
ITU-T G.997.1
ITU-T G.993.2 VDSL2 (Profile 17a/30a/35b support)
ITU-T G.993.5 G.Vectoring & G.INP
ITU-T G.998
Regulatory ComplianceFCC Part 15 Class A, CE
Environment
TemperatureOperating: 0~50 degrees C
Storage: -10~70 degrees C
HumidityOperating: 5~95% (non-condensing)
Storage: 5~95% (non-condensing)
Performance
RJ11 Performance*(Downstream/Upstream)
Distance
(meter)
Interleave
(Downstream/Upstream: Mbps)
Asymmetric
Symmetric
8dB
12dB
8dB
12dB
200m
254/56
234/53
178/160
163/144
400m
197/51
174/46
145/122
104/104
600m
112/40
88/36
81/72
67/58
800m
77/29
56/24
48/47
36/36
1000m
32/7
28/6
18/17
16/15
1200m
27/2
23/5
14/14
13/12
1400m
18/1
15/1
12/6
9/4
Distance
(meter)
G.INP
(Downstream/Upstream: Mbps)
Asymmetric
Symmetric
8dB
12dB
8dB
12dB
200m
281/59
246/56
192/168
169/144
400m
208/53
180/47
153/127
133/104
600m
112/42
84/36
87/72
69/56
800m
76/30
56/22
51/48
40/34
1000m
32/9
27/6
18/17
16/14
1200m
27/4
23/3
14/14
12/12
1400m
24/2
21/2
11/9
9/6
* The performance data above is for reference only. The actual data rate will vary on the quality of the copper wire and environmental factors.
DateVersionDescriptionDownload
2018/23/111.0

VC-231GP

Download Icon
DateVersionDescriptionDownload
2021/02/071.1

Modify contents of user manual.

Download Icon
2018/03/101.0

Initial release.

Download Icon
DateVersionDescriptionDownload
2019/07/011.0

EC Declaration.

Download Icon

Ordering Information

VC-231GP

1-Port 10/100/1000T 802.3at PoE+ Ethernet to VDSL2 Converter

Ordering Information

VC-231GP

1-Port 10/100/1000T 802.3at PoE+ Ethernet to VDSL2 Converter (30a profile w/G.Vectoring)
     

Subscribe to PLANET e Newsletter

Receive the latest product information and company news!