planet.com.sa
planet.com.sa

login

planet.com.sa
planet.com.sa

Product Meta

  • total_sales: 0
  • product_code: IGT-2205AT-E
  • applications_tab: <p><strong>Hardened Environment Application</strong></p><p>PLANET IGT-2205AT-E Industrial Gigabit Media Converter offers full-port Gigabit transmission speed. It is designed with high reliability and security to ensure continuous operation in harsh environments such as transportation control cabinets, factory floors, outdoor installations, and locations with extreme temperatures. In addition, the IGT-2205AT-E is compatible with 100/1000Mbps SFP transceivers to provide a stable, long-distance connection and flexible industrial networking deployment.</p><p> <img style="display: block; margin-left: auto; margin-right: auto;" src="https://www.planet.com.sa/planet-storage/2025/12/IGS-2205AT-E-3.png" alt="" width="700" height="322"></p><p><strong>Redundancy Application</strong></p><p>The IGT-2205AT-E Industrial Gigabit Media Converter supports rapid fiber link redundancy for mission-critical Ethernet applications. The redundant mode features an auto-recovery function—when the destination port of a packet is link-down, the converter will automatically forward the packet to the backup port, ensuring uninterrupted communication.</p><p><img style="display: block; margin-left: auto; margin-right: auto;" src="https://www.planet.com.sa/planet-storage/2025/12/IGT-2205AT-E-4.png" alt="" width="700" height="238"></p>
  • key_features_tab: <p><strong>Physical Port</strong></p><ul> <li>2-port 10/100/1000BASE-T RJ45 with auto MDI / MDI-X function</li> <li>2-port SFP, supporting 100/1000BASE-X transceiver type auto detection</li> </ul><p> </p><p><strong>Fiber Port Redundancy (This function is only enabled when DIP Switch 1 is set to ON)</strong></p><ul> <li>Only primary port is active at a time, while the backup port is blocked.</li> <li>When primary port link failure occurs, the traffic will swap to back up port automatically.</li> <li>Once the primary port status is back to link up, the traffic will swap from backup port to primary port.</li> </ul><p> </p><p><strong>Layer 2 Features</strong></p><ul> <li>Supports auto-negotiation and 10/100Mbps half / full duplex and 1000Mbps full duplex mode</li> <li>High-performance Store and Forward architecture, runt/CRC filtering eliminates erroneous packets to optimize the network bandwidth</li> <li>IEEE 802.3x flow control for full duplex operation and back pressure for half duplex operation</li> <li>10K jumbo frame size support</li> <li>Integrated address look-up engine, supporting 8K absolute MAC addresses</li> <li>Automatic address learning and address aging</li> </ul><p> </p><p><strong>Industrial Case and Installation</strong></p><ul> <li>Slim IP40 metal case protection</li> <li>DIN-rail, side wall-mount design for redundant power design</li> <li>Redundant Power Design <ul> <li>12 to 58V DC, redundant power with reverse polarity protection function</li> </ul> </li> <li>Supports 4000 VDC Ethernet ESD protection</li> <li>-40 to 75 degrees C operating temperature</li> </ul><p> </p>
  • specifications_tab: <table style="width:100%;" class="common_table_sky"><thead><tr><th colspan="2">Hardware Specifications</th></tr></thead><tbody><tr><td class="align-middle">Copper Port</td><td>2 x 10/100/1000BASE-T RJ45 TP<br /> Auto-MDI/MDI-X, auto-negotiation</td></tr><tr><td class="align-middle">SFP / mini-GBIC Slots</td><td>2 x 100/1000BASE-X SFP interfaces<br /> Supports auto detection</td></tr><tr><td class="align-middle">DIP Switch</td><td><table class="table-bordered-bone" cellpadding="6"><tr><td width="150" valign="middle" bgcolor="#7f9cd3"><font color="#FFFFFF">DIP</font></td><td width="150" valign="middle" bgcolor="#7f9cd3"><font color="#FFFFFF">Function</font></td><td width="150" valign="middle" bgcolor="#7f9cd3"><font color="#FFFFFF">ON</font></td><td width="150" valign="middle" bgcolor="#7f9cd3"><font color="#FFFFFF">OFF</font></td></tr><tr><td valign="middle">1</td><td valign="middle">Fiber Redundancy</td><td valign="middle"> Port 3 and Port 4 are both linked; only Port 3 transmits data. If Port 3 fails, traffic will switch to Port 4.</td><td valign="middle"> Port 3 and Port 4 are both linked and can transmit data simultaneously.</td></tr><td valign="middle">2</td><td valign="middle">Flow Control</td><td valign="middle">Pauses transmission when receiver is busy to reduce packet loss</td><td valign="middle">No flow control; data sends continuously, may lose packets</td></tr><td valign="middle">3</td><td valign="middle">Broadcast Storm Restraint</td><td valign="middle"> Limits broadcast traffic to prevent network overload.</td><td valign="middle"> No limit; broadcasts may cause network congestion.</td></tr><td valign="middle">4</td><td valign="middle">Fiber Port Speed Selection</td><td valign="middle"> Can link and transmit data at both 100/1000 Mbps.</td><td valign="middle"> Can only link and transmit data at 1000 Mbps.</td></tr></table></td></tr><tr><td class="align-middle">Connector</td><td>Removable 4-pin terminal block<br /> Pin 1/2 for Power 1; Pin 3/4 for Power 2</td></tr><tr><td class="align-middle">LED</td><td><b>System and Power:</b><br /> 　<font color="Green"><b>Green</b></font>: Power 1<br /> 　<font color="Red"><b>Red</b></font>: Alarm<br /> <b>Per Copper Port (Port-1~ Port-2):</b><br /> 　<font color="Green"><b>Green</b></font>: Port LNK/ACT<br /> 　<font color="FFBF00"><b>Amber</b></font>:1G LNK<br /> <b>SFP interface (Port-3~ Port-4):</b><br /> 　<font color="Green"><b>Green</b></font>: 1G LNK/ACT</td></tr><tr><td class="align-middle">ESD Protection</td><td>4KV DC</td></tr><tr><td class="align-middle">Enclosure</td><td>IP40 type metal case</td></tr><tr><td class="align-middle">Installation</td><td>DIN-rail kit (Side wall mount is an optional accessory)</td></tr><tr><td class="align-middle">Dimensions (W x D x H)</td><td>26 x 85 x 85mm</td></tr><tr><td class="align-middle">Weight</td><td>294g</td></tr><tr><td class="align-middle">Power Requirements</td><td>DC 12~58V<br /> Redundant power with reverse polarity reverses protection function</td></tr><tr><td class="align-middle">Power Consumption / Dissipation</td><td>Max. 0.58 watts/1.98 BTU (Power on without any connection)<br /> Max. 3.5 watts/11.94 BTU (Ethernet full loading)</td></tr></tbody><thead><tr><th colspan="2">Switch Specification</th></tr></thead><tbody><tr><td class="align-middle">Switch Processing Scheme</td><td>Store-and-Forward</td></tr><tr><td class="align-middle">Address Table</td><td>8K entries</td></tr><tr><td class="align-middle">Maximum Transmit Unit</td><td>10K bytes</td></tr><tr><td class="align-middle">Switch fabric</td><td>8Gbps</td></tr><tr><td class="align-middle">Throughput (packet per second)</td><td>11.9Mpps@64bytes</td></tr><tr><td class="align-middle">Flow Control</td><td>Back pressure for half duplex<br /> IEEE 802.3x pause frame for full duplex</td></tr></tbody><thead><tr><th colspan="2">Standards Conformance</th></tr></thead><tbody><tr><td class="align-middle">Standards Compliance</td><td>IEEE 802.3 Ethernet<br /> IEEE 802.3u Fast Ethernet <br /> IEEE 802.3ab Gigabit Ethernet<br /> IEEE 802.3z Gigabit Ethernet 1000BASE-SX/LX<br /> IEEE 802.3x Full-Duplex Flow Control<br /> IEEE 802.3az Energy Efficient Ethernet</td></tr><tr><td class="align-middle">Regulatory Compliance</td><td>FCC Part 15 Class A, CE</td></tr><tr><td class="align-middle">Stability Testing</td><td>IEC60068-2-32 (Free fall)<br /> IEC60068-2-27 (Shock)<br /> IEC60068-2-6 (Vibration)</td></tr></tbody><thead><tr><th colspan="2">Environment</th></tr></thead><tbody><tr><td class="align-middle">Temperature</td><td>Operating: -40~75 degrees C<br /> Storage: -40~75 degrees C</td></tr><tr><td class="align-middle">Humidity</td><td>Operating: 5~95% (non-condensing)<br /> Storage: 5~95% (non-condensing)</td></tr></tbody></table>
  • ekit_post_views_count: 37
  • rank_math_news_sitemap_robots: index
  • rank_math_robots: a:1:{i:0;s:5:"index";}
  • rank_math_internal_links_processed: 1

Industrial Compact 2-Port 10/100/1000BASE-T to 2-Port 100/1000BASE-X SFP Media Converter

» IGT-2205AT-E

Flexible, Reliable and Industrial-grade Network Distance Extension Solution

PLANET IGT-2205AT-E is an industrial-grade Gigabit media converter that provides non-blocking wire-speed performance and high flexibility for extending Gigabit Ethernet in harsh industrial environments. It is equipped with two 10/100/1000BASE-T RJ45 copper ports and two 100/1000BASE-X SFP fiber optic interfaces, enclosed in a rugged IP40-rated case with a redundant power system. The IGT-2205AT-E is ideal for applications such as surveillance deployment, industrial control, and wireless service in environments with extreme temperatures ranging from -40 to 75 degrees C.

 

Fiber-Optic Link Capability Enables Extension of Network Deployment

The two SFP slots are compatible with 100BASE-FX and 1000BASE-X fiber-optic transceivers. The robust fiber uplink capability ensures stable throughput for all connected network nodes. Gigabit Ethernet transmission can be extended up to 300 meters over multi-mode fiber and up to 10/20/30/40/50/70 kilometers over single-mode fiber. Fast Ethernet can be extended up to 2 kilometers with multi-mode fiber or up to 20/40/60 kilometers with single-mode fiber. This makes it well-suited for use in factory data centers and distribution networks.

 

Adjustable 4-port Switch Mode or 2-port Fiber Redundant Mode

Via the built-in DIP switch, the two SFP fiber interfaces of the IGT-2205AT-E can be configured as Ethernet switch mode or fiber redundant mode. With the Ethernet switch mode, it can operate in Store-and-Forward mechanism with high performance; with the 2-port Fiber redundant mode, it provides rapid fiber redundancy of link for highly critical Ethernet applications. The redundant mode supports auto-recovering function. If the destination port of a packet is link-down, it will forward the packet to the other port of the backup pair.

 

 

Environmentally Hardened Design

The IGT-2205AT-E is equipped with a slim-type IP40-rated metal case for easy deployment in demanding industrial environments. With IP40 industrial-grade protection, the IGT-2205AT-E provides a high level of immunity against electromagnetic interference and heavy electrical surges typically found on plant floors or in curbside traffic control cabinets. Capable of operating in a wide temperature range from -40 to 75 degrees C, the IGT-2205AT-E can be installed in almost any harsh environment. It also supports both DIN rail and wall mounting, allowing for efficient use of cabinet space.

 

Convenient and Reliable Power System

To enhance operational reliability and flexibility, the IGT-2205AT-E is equipped with two DC power input connectors for redundant power installation. It supports a wide input voltage range from 12 to 58V DC, making it suitable for global high-availability applications requiring dual or backup power inputs.

 

Flexible and Easy Installation with Limited Space

The compact-sized IGT-2205AT-E is specially designed for installation in narrow spaces such as wall enclosures. It can be mounted via wall mounting or DIN rail, offering greater flexibility and ease of installation in space-constrained environments.

Hardened Environment Application

PLANET IGT-2205AT-E Industrial Gigabit Media Converter offers full-port Gigabit transmission speed. It is designed with high reliability and security to ensure continuous operation in harsh environments such as transportation control cabinets, factory floors, outdoor installations, and locations with extreme temperatures. In addition, the IGT-2205AT-E is compatible with 100/1000Mbps SFP transceivers to provide a stable, long-distance connection and flexible industrial networking deployment.

 

Redundancy Application

The IGT-2205AT-E Industrial Gigabit Media Converter supports rapid fiber link redundancy for mission-critical Ethernet applications. The redundant mode features an auto-recovery function—when the destination port of a packet is link-down, the converter will automatically forward the packet to the backup port, ensuring uninterrupted communication.

Physical Port

  • 2-port 10/100/1000BASE-T RJ45 with auto MDI / MDI-X function
  • 2-port SFP, supporting 100/1000BASE-X transceiver type auto detection

 

Fiber Port Redundancy (This function is only enabled when DIP Switch 1 is set to ON)

  • Only primary port is active at a time, while the backup port is blocked.
  • When primary port link failure occurs, the traffic will swap to back up port automatically.
  • Once the primary port status is back to link up, the traffic will swap from backup port to primary port.

 

Layer 2 Features

  • Supports auto-negotiation and 10/100Mbps half / full duplex and 1000Mbps full duplex mode
  • High-performance Store and Forward architecture, runt/CRC filtering eliminates erroneous packets to optimize the network bandwidth
  • IEEE 802.3x flow control for full duplex operation and back pressure for half duplex operation
  • 10K jumbo frame size support
  • Integrated address look-up engine, supporting 8K absolute MAC addresses
  • Automatic address learning and address aging

 

Industrial Case and Installation

  • Slim IP40 metal case protection
  • DIN-rail, side wall-mount design for redundant power design
  • Redundant Power Design
    • 12 to 58V DC, redundant power with reverse polarity protection function
  • Supports 4000 VDC Ethernet ESD protection
  • -40 to 75 degrees C operating temperature

 

Hardware Specifications
Copper Port2 x 10/100/1000BASE-T RJ45 TP
Auto-MDI/MDI-X, auto-negotiation
SFP / mini-GBIC Slots2 x 100/1000BASE-X SFP interfaces
Supports auto detection
DIP Switch
DIPFunctionONOFF
1Fiber Redundancy Port 3 and Port 4 are both linked; only Port 3 transmits data. If Port 3 fails, traffic will switch to Port 4. Port 3 and Port 4 are both linked and can transmit data simultaneously.
2Flow ControlPauses transmission when receiver is busy to reduce packet lossNo flow control; data sends continuously, may lose packets
3Broadcast Storm Restraint Limits broadcast traffic to prevent network overload. No limit; broadcasts may cause network congestion.
4Fiber Port Speed Selection Can link and transmit data at both 100/1000 Mbps. Can only link and transmit data at 1000 Mbps.
ConnectorRemovable 4-pin terminal block
Pin 1/2 for Power 1; Pin 3/4 for Power 2
LEDSystem and Power:
　Green: Power 1
　Red: Alarm
Per Copper Port (Port-1~ Port-2):
　Green: Port LNK/ACT
　Amber:1G LNK
SFP interface (Port-3~ Port-4):
　Green: 1G LNK/ACT
ESD Protection4KV DC
EnclosureIP40 type metal case
InstallationDIN-rail kit (Side wall mount is an optional accessory)
Dimensions (W x D x H)26 x 85 x 85mm
Weight294g
Power RequirementsDC 12~58V
Redundant power with reverse polarity reverses protection function
Power Consumption / DissipationMax. 0.58 watts/1.98 BTU (Power on without any connection)
Max. 3.5 watts/11.94 BTU (Ethernet full loading)
Switch Specification
Switch Processing SchemeStore-and-Forward
Address Table8K entries
Maximum Transmit Unit10K bytes
Switch fabric8Gbps
Throughput (packet per second)11.9Mpps@64bytes
Flow ControlBack pressure for half duplex
IEEE 802.3x pause frame for full duplex
Standards Conformance
Standards ComplianceIEEE 802.3 Ethernet
IEEE 802.3u Fast Ethernet
IEEE 802.3ab Gigabit Ethernet
IEEE 802.3z Gigabit Ethernet 1000BASE-SX/LX
IEEE 802.3x Full-Duplex Flow Control
IEEE 802.3az Energy Efficient Ethernet
Regulatory ComplianceFCC Part 15 Class A, CE
Stability TestingIEC60068-2-32 (Free fall)
IEC60068-2-27 (Shock)
IEC60068-2-6 (Vibration)
Environment
TemperatureOperating: -40~75 degrees C
Storage: -40~75 degrees C
HumidityOperating: 5~95% (non-condensing)
Storage: 5~95% (non-condensing)

Photo

Model

Description

TSN-900-2T2S

Industrial 2-Port 10/100/1000T + 2-Port 1G/2.5G SFP Managed TSN Media Converter

IGT-900-2T2S

Industrial 2-Port 10/100/1000T + 2-Port 100/1000/2500X SFP Managed Media Converter

IGT-900-1T1S

Industrial 1-Port 10/100/1000T + 1-Port 100/1000/2500X SFP Managed Media Converter

IGT-815AT

Industrial Compact 100/1000BASE-X to 10/100/1000BASE-T Media Converter

IGT-805AT

Industrial 10/100/1000BASE-T to 100/1000BASE-X SFP Media Converter

IGT-1205AT

Industrial 1-port 10/100/1000T to 2-port 100/1000/2500X SFP Media Converter

Ordering Information

IGT-2205AT-E

Industrial Compact 2-Port 10/100/1000BASE-T to 2-Port 100/1000BASE-X SFP Media Converter

Subscribe to PLANET e Newsletter

Receive the latest product information and company news!