Thanks for purchasing PLANET IGS-6325-16P4S Industrial L3 16-Port 10/100/1000T 802.3at PoE + 4-Port 1G/2.5G SFP Managed Ethernet Switch.

Please note that this firmware version is for IGS-6325-16P4S hardware version 1. 

This document provides the firmware release note and history of the product below:

Version 2.2412b250528 was released on 5/28/2025
=======================================
Firmware version: v2.2412b250528
Hardware version: 2.0
File Name: FW-IGS-6325-16P4S_v2.2412b250528.mfi
File Size: 19,015,241 bytes 
Released on 5/28/2025
=======================================

This firmware provides the following modifications:

A: Bug Fixed - N/A
   

B: Function added - 

IPv4 RIPv1/v2 for dynamic routing
IPv6 OSPFv3 for dynamic routing

C: Others - 

Enhanced product security and improved system robustness.



******************************
Firmware Release History:  
******************************

Version 1.440b200826 was released on 08/26/2020
=======================================
Firmware version: v1.440b200826
Hardware version: 1.0
File Name: FW-IGS-6325-16P4S_v1.440b200826.mfi
File Size: 14,815,232 bytes 
Released on 08/26/2020
=======================================

This firmware provides the following modifications:

A: Bug Fixed - N/A

B: Function added - 

   1. Added port 17 to port 20 that support an operating speed of 2.5G.

[Note]
Hardware-based factory reset default is required for this firmware upgrade.
Press the hardware-based reset button on the device for about 10 seconds. 

[Upgrade Requirements]:

1. The latest firmware version of IGS-6325-16P4S.
2. The IGS-6325-16P4S switch.
3. Workstation with Microsoft IE 8.0 or above.

[Upgrade procedure]:

1. Connect the RJ45 UTP cable to the target switch.

2. Login is required to access the Web interface after the booting is completed successfully. The factory default user name and password are both "admin".

3. When the Web UI main screen appears, click Maintenance--> Web Firmware Upgrade" on the left side of the Menu.  

     Web Firmware Upgrade:
     (1) Click the "Choose File" button to locate firmware path.
     (2) Click the "Upload" button to start the firmware upgrade procedure. Please don't power off the switch while the procedure is starting.
     (3) Please wait until the firmware upgrade process is completed.
     (4) Reset to factory default and reboot system again.

4. Relogin the switch via Web browser. Please click "System -->System Information --> Software Version" to double-check if the firmware is upgraded successfully.

Version 1.440190426 was released on 04/26/2019
=======================================
Firmware version: v1.440190426
Hardware version: 1.0
File Name: FW-IGS-6325-16P4S_v1.440190426.mfi
File Size: 16,560,128 bytes 
Released on 04/26/2019
=======================================

This firmware provides the following modifications:

A: Bug Fixed -
   1.Fix SFP Slot LNK/ACT LED not lit issue after device reboot.

B: Function added - N/A

[Note]
Hardware-based factory reset default is required for this firmware upgrade.
Press the hardware-based reset button on the device for about 10 seconds. 

Version 1.440190121 was released on 01/21/2019
=======================================
Firmware version: v1.440190121 
Hardware version: 1.0
File Name: FW-IGS-6325-16P4S_v1.440190121.mfi
File Size: 16,752,640 bytes 
Released on 01/21/2019
=======================================

Initial Release
   
Sincerely yours,
PLANET Technical Support Team
Http://www.planet.com.tw







